Hexafluorozirconic Acid with CAS 12021-95-3-manufacture,factory,supplier from China
(Total 24 Products for Hexafluorozirconic Acid with CAS 12021-95-3)
1. Product description:Product nameHexafluorozirconic acidCAS12021-95-3MFF6HZr-MW206.22EINECS234-666-0Density1.512 g/mL at 25 °CSolubilityMiscible with acid-base solutions.StorageStorage at RTFormLiquidColorColorlessPackage1L/Bottle 200L/drum or 1000L/drum2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is a new enterprise integrating production, sales and service.Our products mainly include organic chemicals, inorganic chemicals, food additives, pharmaceutical intermediates, da
Contact Now
1. Product description:Formic acid (HCO2H), also called methanoic acid, is the simplest carboxylic acid. Formic acid was first isolated by the distillation of ant bodies and was named after the Latin formica, meaning “ant.” Its proper IUPAC name is now methanoic acid. Industrially, formic acid is produced by treatment of carbon monoxide with an alcohol such as methanol (methyl alcohol) in the presence of a catalyst.Formic acid is found both naturally occurring and frequently synthesized in laboratories.
Contact Now
1. Product description:3-Methyl-2-butanoe is a colorless, transparent and aromatic fine chemical intermediate and high-grade solvent. It is widely used in synthetic dyes, medicine, agriculture and organic solvents.Product name3-Methyl-2-butanoneCAS563-80-4MFC5H10OMW86.13EINECS209-264-3Melting point-92 °C (lit.)Boiling point94-95 °C (lit.)Density0.805 g/mL at 25 °C (lit.)Flash point6 °CFormLiquidColorColorlessPackage1L/Bottle 200L/drum or 1000L/drum2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is
Contact Now
1. Product description:Product name5-Sulfosalicylic acid dihydrateCAS5965-83-3MFC7H10O8SMW254.21EINECS641-618-6Melting point105-110 °C(lit.)Boiling point100 °CDensity0,8 g/cm3SolubilityH2O: 1 M at 20 °C, clear, colorlessFlash point150°CStorageStorage at RTFormPowderColorWhitePackage25kg/bag2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is a new enterprise integrating production, sales and service.Our products mainly include organic chemicals, inorganic chemicals, food add
Contact Now
1. Product description:Product name3-Methyl-2-butanoneCAS563-80-4MFC5H10OMW86.13EINECS209-264-3Melting point-92 °C (lit.)Boiling point94-95 °C (lit.)Density0.805 g/mL at 25 °C (lit.)Flash point6 °CFormLiquidColorColorlessPackage1L/Bottle 200L/drum or 1000L/drum2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is a new enterprise integrating production, sales and service.Our products mainly include organic chemicals, inorganic chemicals, food additives, pharmaceutical intermediates, daily chemic
Contact Now
1. Product description:Boric acid is a crystalline compound of boron trioxide dissolved in water. It is an inorganic acid, mainly containing H2B4O7(also known as pyroboric acid), metaborate (HBO2) N and orthoboric acid H3BO3(also known as proboric acid). Boric acid has the most water content and is the most stable. Boric acid is also referred to as boric acid, the appearance of white powdery crystal or triclinic axial plane scale crystal, shiny. It has a slight bitter taste. Slippery in contact with skin.
Contact Now
1. Product description:Oleic acid is a kind of unsaturated fatty acid with its molecular structure containing a carbon-carbon double bond, being the fatty acid that makes olein. It is one of the most extensive natural unsaturated fatty acids. Oil lipid hydrolysis can lead to oleic acid with the chemical formula being CH3 (CH2) 7CH = CH (CH2) 7 • COOH. The glyceride of the oleic acid is one of the main ingredients of olive oil, palm oil, lard and other animal and vegetable oils.
Contact Now
1. Product description:Stearic acid is one of several major long-chain fatty acids comprising oils and fats. It is presented in animal fats, oil and some kinds of vegetable oils as wellin the form of glycerides. These oils, after hydrolysis, produce the stearic acid.Stearic acid is a fatty acid widely existing in nature and has the general chemical properties of carboxylic acids. Almost all kinds of fat and oil contain certain amount of stearic acid with the content in the animal fats being relative high.
Contact Now
1.Product DescriptionAluminum hydroxide (Aluminiumhydroxide), chemical formula Al(OH)3, white solid, insoluble in water, soluble in acid or alkali, is a typical amphoteric hydroxide. After it is heated and dehydrated in the air, it can be transformed into alumina, which is of great significance to alumina production. Aluminum hydroxide can react with acid to form salt and water, and it can react with strong base to form Chemicalbook salt and water, so it is an amphoteric hydroxide. Because it shows a certain degree of acidity, it can also be called aluminate (H3AlO3).
Contact Now
1. Product description:Product nameBenzilCAS134-81-6MFC14H10O2MW210.23EINECS205-157-0Melting point94-95 °C(lit.)Boiling point346 °CDensity1,521 g/cm3Flash point346-348°CStorageStorage at RTFormPowderColorLight YellowPackage25kg/bag2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is a new enterprise integrating production, sales and service.Our products mainly include organic chemicals, inorganic chemicals, food additives, pharmaceutical intermediates, daily chemicals and other chemical ra
Contact Now
1. Product description:Adipic acid, also known as fatty acid, is an important organic binary acid, which can be formed into salt reaction, esterification reaction, amidation reaction and so on, and can be condensed into polymer with two amines or diols. Adipic acid is an important two meta carboxylic acid in industry. It plays an important role in chemical production, organic synthesis industry, medicine, Lubricant manufacturing and so on.
Contact Now
1. Product description:Product nameIsoamyl AlcoholCAS123-51-3MFC5H12OMW88.15EINECS204-633-5Melting point-117 °CBoiling point131-132 °CDensity0.809 g/mL at 25 °C(lit.)Flash point109.4 °FWater Solubility25 g/L (20 ºC)PH7 (25g/l, H2O, 20℃)FormLiquidColorColorlessStorageStore below +30°C.Package1L/Bottle 200L/drum or 1000L/drum2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is a new enterprise integrating production, sales and service.Our products mainly include organic chemic
Contact Now
1. Product description:Product name3-HydroxybenzaldehydeCAS100-83-4MFC7H6O2MW122.12EINECS202-892-9Melting point100-103 °C(lit.)Boiling point191 °C50 mm Hg(lit.)Density1.1179SolubilitySOLUBLEPH3-4 (H2O, 20℃)(saturated solution)StorageSealed in dry,Room TemperatureFormCrystallineColorWhitePackage25kg/bag2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is a new enterprise integrating production, sales and service.Our products mainly include organic chemicals, inorganic chemicals, f
Contact Now
SpecificationPruduct nameIsopropyl myristateCAS110-27-0MFC17H34O2MW270.45EINECS203-751-4Melting ppoint~3 °C (lit.)Boiling point193 °C/20 mmHg (lit.)Density0.85 g/mL at 25 °C (lit.)Packing & DeliveryTo better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.Packaging describtion : 1L/bottle ; 25kg/drum ; 200L/drumCompany ProfileShandong Lukong Supply Chain Co.,Ltd. is Located in the beautiful spring city, Ji'nan Shandong, is a new enterpriseintegrating production, sales and service.
Contact Now
1. Product description:Caprylhydroxamic Acid is an ideal organic acid for bacteriostasis. It has efficient and selective chelation ability to divalent iron ions and trivalent iron ions. In the environment with limited iron ions, the growth of Mycobacterium chemicalbook is limited. At the same time, it has the best carbon chain length that can promote the degradation of cell membrane structure.
Contact Now
1. Product description:Product name3-ETHYL-3-OXETANEMETHANOLCAS3047-32-3MFC6H12O2MW116.16EINECS221-254-0Boiling point96 °C/4 mmHg (lit.)Density1.019 g/mL at 25 °C (lit.)Flash point227 °FFormLiquidColorColorlessPackage25L/drum 200L/drum or 1000L/drum2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is a new enterprise integrating production, sales and service.Our products mainly include organic chemicals, inorganic chemicals, food additives, pharmaceutical intermediates, daily chemical
Contact Now
1. Product description:Sodium bicarbonate, which is the compound commonly called baking soda, exists as a white, odorless, crystalline solid. It occurs naturally as the mineral nahcolite, which derives its name from its chemical formula by replacing the “3” in NaHCO3 with the ending “lite.” The world’s main source of nahcolite is the Piceance Creek Basin in western Colorado, which is part of the larger Green River formation.
Contact Now
1. Product description:Magnesium carbonate, molecular weight 84.31. White granular powder. It decomposes at 350°C and loses carbon dioxide at 900°C. Slightly soluble in cold water, slowly soluble in acid. Its trihydrate is a colorless needle-like crystal, with a melting point of 1Chemicalbook 65°C and a relative density of 1.850. The pentahydrate is a white monoclinic crystal with a relative density of 1.73, which is decomposed by heating in the air. Carbon dioxide can be added into the magnesium salt aqueous solution while sodium carbonate is added to obtain a hydrate.
Contact Now
1. Product description:Salicylic acid is an important organic synthetic raw material, widely used in medicine, pesticides, dyes, rubber, food and perfumes. In the pharmaceutical industry, the main drug productions of salicylic acid are sodium salicylate, wintergreen oil (methyl salicylate), aspirin (acetylsalicylic acid), salicylic acid amine, phenyl salicylate. In dye industry, it is used for production mordant pure yellow , direct yellow 3GN, direct yellow GR, direct brown 3GN, acid mordant brown G, acid mordant yellow GG, acid yellow dye complex.
Contact Now
SpecificationPruduct namePhenolCAS108-95-2MFC6H6OMW94.11Melting point40-42 °C(lit.)Boiling point40-42 °C(lit.)EINECS203-632-7Density1.071 g/mL at 25 °C(lit.)Vaper pressure0.09 psi ( 55 °C)Flashing point175 °FStorage condition2-8°CSolubilityH2O: 50 mg/mL at 20 °C, clear, colorlessFormLiquidPacking & DeliveryTo better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.Packaging describtion : 1L/bottle ; 25kg/drum ; 200L/drumCompany ProfileShandong Lukong Supply Chain Co.,Ltd.
Contact Now
SpecificationProduct namep-PhenylenediamineCAS106-50-3MFC6H8N2MW108.14EINECS203-404-7Melting point138-143 °C (lit.)Boiling point267 °C (lit.)Density1.135 g/cm3 (20℃)Refractive index1.6339 (estimate)Flashing point156 °CStorage conditionStore below +30°C.SolubilitySoluble in alcohol, chloroform, ether and hot benzene.Coefficient of acidity(pKa)4.17(at 25℃)AppranceWhite powderPacking & DeliveryTo better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.Packaging describtion : 25kg/bag.40bag/palletCompany Profi
Contact Now
1. Product description:Sodium sulfite is an inorganic compound. It is a white granular powder at room temperature with the odor of sulfur dioxide, stable when dry, and sensitive to moisture. It is soluble in water and glycerin, but insoluble in ethanol. The aqueous solution is alkaline. Its aqueous solution is alkaline to litmus paper and phenolphthalein. It reacts with acid to produce toxic sulfur dioxide gas. The pH of 1Chemicalbook% aqueous solution is 8.3~9.4, with strong reduction sex.
Contact Now
1.Product DescriptionSodium carboxymethylcellulose (CMC) is a carboxymethylated derivative of cellulose, also known as cellulose gum. It is an anionic fiber Chemicalbook vitamin ether and is the most important ionic cellulose gum. It is usually an anionic polymer compound prepared by reacting natural cellulose with caustic alkali and monochloroacetic acid. The molecular weight of the compound ranges from several thousand to one million.CMC is white or milky white fibrous powder or granules, with a density of 0.5-0.7 g/cm3, almost odorless, tasteless, and hygroscopic.
Contact Now
1. Product description:Benzoic acid is the simplest member of the aromatic carboxylic acid family. It is a weak acid that is a precursor for the synthesis of many important organic compounds. More than 90 percent of commercial benzoic acid is converted directly to phenol and caprolactam. Its use in the production of glycol benzoates for the application of plasticizer in adhesive formulations is increasing. The organic compound is also used in the manufacture of alkyd resins and drilling mud additive for crude oil recovery applications.
Contact Now
Relate News
Sources of stearic acidStearic acid can come from plants or animals. Depending on the application we are going to use, we will need or require one or the other source.Vegetable-type stearic acid is actually obtained by hydrolysis of palm oil (or its fractions, such as stearin or oleoresin) followed by hydrogenation and subsequent distillation.For its part, animal-type stearic acid is obtained by hydrolysis of animal fats (tallow), subsequent hydrogenation and subsequent distillation.
SpecificationProduct namep-PhenylenediamineCAS106-50-3MFC6H8N2MW108.14EINECS203-404-7Melting point138-143 °C (lit.)Boiling point267 °C (lit.)Density1.135 g/cm3 (20℃)Refractive index1.6339 (estimate)Flashing point156 °CStorage conditionStore below +30°C.SolubilitySoluble in alcohol, chloroform, ether and hot benzene.Coefficient of acidity(pKa)4.17(at 25℃)AppranceWhite powderPacking & DeliveryTo better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.Packaging describtion : 25kg/bag.40bag/palletCompany Profi
Product DescriptionProduct namePhosphoric acidCAS7664-38-2MFH3O4PMW98EINECS231-633-2Melting point~40 °C(lit.)Boilding point158 °C(lit.)Density1.685 g/mL at 25 °C(lit.)PH<0.5 (100g/l, H2O, 20℃)FormLiquidColorColorlessPackage200L/drum or 1000L/drumPackaging & ShippingAll of our liquid products are packaged with 200L drum, 1000L drum, Flexibag, ISO tanks etc. If you have other requirementfor package please let us know freely.
Product DescriptionProduct name3-DimethylaminopropylamineCAS109-55-7MFC5H14N2MW102.18EINECS203-680-9Melting point-60 °CBoiling point133 °C(lit.)Density0.812 g/mL at 25 °C(lit.)Flash point90 °FStorageStore below +30°C.FormLiquidColorColorlessPackage1L/Bottle 200L/drum or 1000L/drumPackaging & ShippingAll of our liquid products are packaged with 200L drum, 1000L drum, Flexibag, ISO tanks etc. If you have other requirementfor package please let us know freely.
SpecificationPruduct nameCalcium silicateCAS1344-95-2MFCaO3SiMW116.16EINECS215-710-8Melting point1540℃ [CRC10]Formwhite monoclinic crystalsPacking & DeliveryTo better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.Packaging describtion : 25kg/bag ; 40bag/pallet ; 20kg/drumCompany ProfileShandong Lukong Supply Chain Co.,Ltd. is Located in the beautiful spring city, Ji'nan Shandong, is a new enterpriseintegrating production, sales and service.
Product DescriptionProduct nameEDTACAS60-00-4MFC10H16N2O8MW292.24EINECS200-449-4Melting point250 °C (dec.)(lit.)Boilding point434.18°C (rough estimate)Density0,86 g/cm3StorageStore below +30°C.Formcrystalline powderColorWhitePackage25kg/bag Packaging & ShippingAll of our powder products are packaged with 25kg bag, 50kg bag or 1000kg bag. If you have other requirementfor package please let us know freely.Are you looking for EDTA? We are leading professional supplier for this material since 2003.Welcome contact to talk more details if any interested.
Product DescriptionProduct namep-Toluic acidCAS99-94-5MFC8H8O2MW136.15EINECS202-803-3Melting point177-180 °C (lit.)Boilding point274-275 °C (lit.)Flash point181°CDensity1,06 g/cm3StorageStore below +30°C.Formcrystalline powderColorWhitePackage25kg/bagPackaging & ShippingAll of our powder products are packaged with 25kg bag, 50kg bag or 1000kg bag. If you have other requirementfor package please let us know freely.
Today, chlorinated rubber is shipped to Guatemala.The unique advantages of Chlorinated rubber paint are: good chemical resistance, resistance to acid and alkali and salt fog, low water vapor permeability and good water resistance.
Product DescriptionProduct name3-Hydroxy-2-naphthoic acidCAS92-70-6MFC11H8O3MW188.18EINECS202-180-8Melting point218-221 °C(lit.)Boiling point283.17°C (rough estimate)Density1.43 g/cm3 (23℃)Flash point>150°CStorageStorage at RTFormPowderColorLight YellowPackage25kg/bag Packaging & ShippingAll of our powder products are packaged with 25kg bag, 50kg bag or 1000kg bag.
Product DescriptionProduct nameL(-)-CarvoneCAS6485-40-1MFC10H14OMW150.22EINECS229-352-5Melting point25°CBoiling point227-230 °C (lit.)Density0.959 g/mL at 25 °C (lit.)Flash point192 °FStorageKeep in dark place, RTFormLiquidColorColorlessPackage1L/Bottle 200L/drum or 1000L/drumPackaging & ShippingAll of our liquid products are packaged with 200L drum, 1000L drum, Flexibag, ISO tanks etc. If you have other requirementfor package please let us know freely.
Benzene, colorless, aromatic liquid. Volatile, flammable and toxic. 879g / cm3, melting point 5.5 ℃, boiling point 80.1 ℃. Insoluble in water, soluble in ethanol, ether, chloroform, carbon disulfide, glacial acetic acid, acetone and other organic solvents. Benzene is an important raw material and main solvent for the production of synthetic resin, synthetic rubber, synthetic fiber, dye, detergent, medicine, pesticide and special auxiliary agent.
Product DescriptionProduct namePhosphoric acidCAS7664-38-2MFH3O4PMW98EINECS231-633-2Melting point~40 °C(lit.)Boilding point158 °C(lit.)Density1.685 g/mL at 25 °C(lit.)PH<0.5 (100g/l, H2O, 20℃)FormLiquidColorColorlessPackage200L/drum or 1000L/drumPackaging & ShippingAll of our liquid products are packaged with 200L drum, 1000L drum, Flexibag, ISO tanks etc. If you have other requirementfor package please let us know freely.
русский
español
francés
