Cuminaldehyde-manufacture,factory,supplier from China

1. Product description:Product nameCuminaldehydeCAS122-03-2MFC10H12OMW148.2EINECS204-516-9Boiling point235-236 °C(lit.)Density0.977 g/mL at 25 °C(lit.)Flash point200 °FSolubilityethanol: soluble1mL/4ML, clear, colorless (70%)StorageSealed in dry,Room TemperatureFormLiquidColorYellowPackage1L/Bottle 200L/drum or 1000L/drum2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is a new enterprise integrating production, sales and service.Our products mainly include organic chemical

1. Product description:Product nameCaprylhydroxamic AcidCAS7377-03-9MFC8H17NO2MW159.23EINECS230-936-7Melting point78°CDensity0.970StorageKeep in dark place,Sealed in dry,Room TemperatureFormPowderColorWhitePackage25kg/bag2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is a new enterprise integrating production, sales and service.Our products mainly include organic chemicals, inorganic chemicals, food additives, pharmaceutical intermediates, daily chemicals and other chemical raw materials.

1. Product description:Calcium stearate is also called calcium stearate. White light crystalline powder. Chemical formula (C17H35COO) 2Ca. The molecular weight is 607.00. Melting point: 179～180℃, decomposed by high heat. It is insoluble in water, cold ethanol and ether, soluble in hot benzene, toluene and turpentine, and slightly soluble in hot ethanol and ether. It is decomposed with strong acid into stearic acid and corresponding calcium salt. There is water absorption in the air. Intolerant to lipolytic microorganisms.

1. Product description:Product nameo-Toluic acidCAS118-90-1MFC8H8O2MW136.15EINECS204-284-9Melting point102-104 °C (lit.)Boiling point258-259 °C (lit.)Density1.062 g/mL at 25 °C (lit.)Refractive index1.512Flash point148 °CStorageStorage at RTFormPowderColorWhitePackage25kg/bag2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is a new enterprise integrating production, sales and service.Our products mainly include organic chemicals, inorganic chemicals, food additives, pharmaceutical intermediate

1. Product description:Sodium hexametaphosphate is a kind of sodium metaphosphate polymers. It is also known as "polyvinylidene sodium," "sodium multiple metaphosphate", "sodium metaphosphate vitreous body", and "Graham salt". It is a colorless transparent glass-like solid or white powder with greater solubility but low dissolving rate in water. Its aqueous solution exhibits acidic property. Its complex of divalent metal ion is relatively more stable than the complexes of mono-valent metal ion.

1. Product description:Product nameSodium tripolyphosphateCAS7758-29-4MFNa5O10P3MW367.86EINECS231-838-7Melting point622 °CSolubilityH2O: may be clear to slightly hazyDensity2.52 g/cm3 (20℃)StorageStore below +30°C.Formcrystalline powderColorWhitePackage25kg/bag2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is a new enterprise integrating production, sales and service.Our products mainly include organic chemicals, inorganic chemicals, food additives, pharmaceutical intermediates, daily chemic

1. Product description:Sodium carbonate, Na2CO3, is a sodium salt of carbonic acid. The pure product appears as a while, odorless powder with a strong alkaline taste. It has high hygroscopicity. It can be easily dissolved in water to form an aqueous solution with moderate alkalinity.Sodium carbonate has wide applications in various kinds of fields around the world. One of most important application of sodium carbonate is for the manufacturing of glass. Based on statistics information, about half of the total production of sodium carbonate is used for the manufacturing of glass.

1. Product description:Sodium salicylate is a sodium salt of salicylic acid. It can be prepared from sodium phenolate and carbon dioxide under higher temperature and pressure. Historically, it has been synthesized from methyl salicylate (found in wintergreen plants or the bark of sweet birch tree) by reacting it with an excess of sodium hydroxide and heating it under reflux.It is used in medicine as an analgesic and antipyretic. Sodium salicylate also acts as non - steroidal anti - inflammatory drug (NSAID), and induces apoptosis in cancer cells and also necrosis.

1. Product description:Sodium sulfate is an important chemical raw material. It is the main raw material for the production of chemical products such as sodium sulfide and sodium silicate. It can also be used as a filler in synthetic detergents, and as a cooking agent in the production of sulphate pulp in the paper industry. Sodium sulfate is also known as sodium sulfate, anhydrous glauber's salt, and anhydrous dermatophyte. White monoclinic system is a fine crystal or powder. The relative density is 2.68 and the melting point is 884°C.

1. Product description:Sodium metabisulfite (chemical formula: Na2S2O5) appears as a white crystalline or powder solid with a slight sulfur odor. It is toxic upon inhalation and can strongly irritate skin and tissue. It can be decomposed to release toxic oxide fumes of sulfur and sodium upon high temperature. It can be mixed with water to form a corrosive acid. It is generally used as disinfectant, antioxidant, and preservative agent as well as a laboratory reagent. As a kind of food additive, it can be used as a preservative and antioxidant in food.

1. Product description:Sodium sulfide is also known as alkali sulfide, stinky soda, and stinky alkali. The pure product is colorless or purple prismatic crystals at room temperature. Industrial sodium sulfide is often pink, brownish red, or ocher due to impurities. It smells of rotten eggs, is corrosive, toxic, and has a density of 2.427. Decomposes at 920°C. It is soluble in cold water and easily soluble in hot water.

1. Product description:Sodium dihydrogen phosphate is a colorless columnar crystal, no, slightly deliquescent. Relative density is 2.04, melting point is 60℃, easily soluble in water but insoluble in ethanol. Heating below 100°C can dissolve in crystal water to form monohydrate; heating to 100°C loses crystal water and becomes anhydrous. Continue heating to become sodium metaphosphate. Sodium dihydrogen phosphate is mainly used as a buffer, improver, emulsifier, and nutrient in food. Application Sodium dihydrogen phosphate has a wide range of uses.

1.Product DescriptionSodium lignosulfonate is a water-soluble multifunctional polymer electrolyte. It is a lignosulfonate. It has the ability to disperse biological slime, iron oxide scale, and calcium phosphate scale. It can also form a stable complex with zinc and calcium ions. Compound. Sodium lignosulfonate and calcium lignosulfonate are commonly used as water-reducing agents in multifunctional concrete waterproofing agents.

1. Product description:Sodium lauryl sulfate is an anionic surfactant, a typical representative of sulfate ester surfactants, referred to as SDS, also known as AS, K12, sodium cocoal sulfate, sodium lauryl sulfate, foaming agent, market The products on sale are usually white to slightly yellow crystalline powder, non-toxic, slightly soluble in alcohol, insoluble in chloroform and ether, easily soluble in water, good compatibility with anion and non-ion, good emulsification and foaming Properties, foaming, penetration, decontamination and dispersion, rich foam, fast biodegradation, but the

1. Product description:Product nameSodium stannateCAS12058-66-1MFNa2O3SnMW212.69EINECS235-030-5Melting point140°CDensity4.68 g/cm3(Temp: 25 °C)StorageStore at room temperature.FormCrystallineColorWhitePackage25kg/bag2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is a new enterprise integrating production, sales and service.Our products mainly include organic chemicals, inorganic chemicals, food additives, pharmaceutical intermediates, daily chemicals and other chemical raw materials.

1. Product description:Potassium hydroxide is commonly known as caustic potassium, potassium ash, etc. Industrial products mainly come in two forms, solid and liquid. The solid is white or light gray flakes or blocks, and the liquid potassium hydroxide is a light yellow liquid. The chemical properties are similar to that of sodium hydroxide. It is highly alkaline and corrosive. It is easily soluble in water and emits a lot of heat. It is also deliquescent. It can easily absorb moisture in the air and deliquescence. It is formed by absorbing carbon dioxide from Chemicalbook.

1. Product description:Brightener for nickel iron alloy electroplating. When used alone, it can make the plating solution clear, make the plating surface bright, and make crystal fine and a great leveling.

1. Product description:Product name4-Formylbenzoic acidCAS619-66-9MFC8H6O3MW150.13EINECS210-607-4Melting point247 °C(lit.)Boiling point231.65°C (rough estimate)Density1.2645 (rough estimate)PH3.5 (1g/l, H2O, 20℃)StorageStorage at RTFormPowderColorLight YellowPackage25kg/bag 2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is a new enterprise integrating production, sales and service.Our products mainly include organic chemicals, inorganic chemicals, food additives, pharmaceutical int

Magnesium oxide is commonly known as bitter soil, also known as magnesia. Is a typical alkaline earth metal oxide, chemical formula MgO. It is a white powder with a melting point of 2852°C, a boiling point of 3600°C, and a relative density of 3.58 (25°C). Soluble in acid and ammonium salt solution. Slowly react with water to generate magnesium hydroxide. It can be dissolved in carbon dioxide aqueous solution to generate magnesium bicarbonate. It can gradually absorb moisture and carbon dioxide in the air, and emit irritating smoke when heated.

1. Product description:Caprolactam is the main raw material for the production of polyamide fiber and resin. Polyamide fiber is called nylon in the United States and nylon in China. Because it was first commercialized by Jinzhou Petrochemical, it was called nylon. Nylon 66 is a polycondensation product of adipic acid and hexamethylene diamine. Nylon 6 is formed by ring-opening polymerization of caprolactam. At present, the main domestic masters of caprolactam production technology are Sinopec Baling Petrochemical Design Institute and Yueyang Petrochemical Design Institute.

1. Product description:Product nameLinaloolCAS78-70-6MFC10H18OMW154.25EINECS201-134-4Melting point25°CBoiling point194-197 °C/720 mmHg (lit.)Density0.87 g/mL at 25 °C (lit.)Flash point174 °FFormLiquidColorColorlessPackage1L/Bottle 200L/drum or 1000L/drum2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is a new enterprise integrating production, sales and service.Our products mainly include organic chemicals, inorganic chemicals, food additives, pharmaceutical intermediates, daily chemical

1. Product description:Product nameStrontium HydroxideCAS1311-10-0MFH18O10SrMW265.76EINECS620-683-4Melting point100 °CDensity1.9 g/mL at 25 °C(lit.)Water SolubilitySoluble in hot water and acid.StorageStore at RT.FormPowderColorWhitePackage25kg/bag2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is a new enterprise integrating production, sales and service.Our products mainly include organic chemicals, inorganic chemicals, food additives, pharmaceutical intermediates, daily chem

1. Product description:White crystalline solid, odorless and hygroscopic. Easily soluble in water, lower alcohols, lower ketones, ethers and aromatic compounds. Uses: It is mainly used in the manufacture of resins, plasticizers and surfactants. Neopentyl glycol has a wide range of uses. It is mainly used as a plasticizer for the production of unsaturated polyester resins, oil-free alkyd resins, polyurethane foams and elastomers. Chemicalbook's additives for advanced lubricants and other fine chemicals.

1. Product description:Product nameN,N-DiMethyl-p-toluidineCAS99-97-8MFC9H13NMW135.21EINECS202-805-4Melting point-25°CBoiling point211 °C(lit.)Solubility0.65g/lDensity0.937 g/mL at 25 °C(lit.)Flash point182 °FStorageStore below +30°C.FormLiquidColorLight YellowPackage1L/Bottle 200L/drum or 1000L/drum2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is a new enterprise integrating production, sales and service.Our products mainly include organic chemicals, inorganic chemicals