Calcium Pyrophosphate-manufacture,factory,supplier from China

1. Product description:Sodium pyrophosphate, also called Tetrasodium pyrophosphate or TSPP is used in the laboratory as a buffering agent. The compound has been shown to be useful in the preparation of an EDTA-sodium pyrophosphate extraction buffer for microcystin analysis of soil samples. Tetrasodium pyrophosphate is an odorless, white powder or granules. It is used in water softener, buffering agent, thickening agent, dispersing agent, wool de-fatting agent, metal cleaner, soap and synthetic detergent builder, general sequestering agent, in electrodeposition of metals.

1. Product description:Anhydrous calcium chloride is a white porous frit or granule. Easily deliquescent. The melting point is 782°C, the density is 2.15g/cm3, and the boiling point is higher than 1600°C. It is easily soluble in water and emits a lot of heat. It is also soluble in ethanol and acetone. The common one is calcium chloride hexahydrate CaCl2·6H2O, colorless trigonal crystal, easy to deliquesce, with a bitter and salty taste, density 1.71g/cm3Chemicalbook, 29.92℃ soluble in crystal water.

1. Product description:Calcium stearate is also called calcium stearate. White light crystalline powder. Chemical formula (C17H35COO) 2Ca. The molecular weight is 607.00. Melting point: 179～180℃, decomposed by high heat. It is insoluble in water, cold ethanol and ether, soluble in hot benzene, toluene and turpentine, and slightly soluble in hot ethanol and ether. It is decomposed with strong acid into stearic acid and corresponding calcium salt. There is water absorption in the air. Intolerant to lipolytic microorganisms.

1. Product description:Calcium chloride is a white porous frit or particle. Easy deliquescence. Melting point of 782℃, density of 2.15g/cm3, boiling point above 1600℃, soluble in water and release a large amount of heat, but also soluble in ethanol and acetone. The most common is calcium chloride CaCl2·6H2O hexahydrate, colorless tripartite crystal, easy to desiccate, with a salty taste, density 1.71g/cm3, dissolved in water of crystallization at 29.92℃. When heated to 30℃, dihydrate (CaCl2·2H2O) is formed by losing four molecules of water, which is a white porous and hygroscopic solid.

1. Product description:Product nameCalcium PyrophosphateCAS7790-76-3MFCa2O7P2MW254.1EINECS232-221-5Melting point1230 °CDensity3.09 g/mL at 25 °C(lit.)SolubilityH2O: insoluble(lit.)StorageStore at room temperature.FormPowderColorWhitePackage25kg/bag2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is a new enterprise integrating production, sales and service.Our products mainly include organic chemicals, inorganic chemicals, food additives, pharmaceutical intermediates, daily chem

Calcium carbonate, also known as limestone and stone powder, is a common chemical substance on the earth. It is an inorganic salt mineral. It is alkaline, hardly soluble in water, and easily soluble in acid. It naturally exists in aragonite, calcite, chalk, limestone, and large Chemicalbook.

1. Product description:Product nameFerric pyrophosphateCAS10058-44-3MFFe4O21P6MW745.21EINECS233-190-0StorageStore at room temperature.FormPowderColorWhitePackage25kg/bag2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is a new enterprise integrating production, sales and service.Our products mainly include organic chemicals, inorganic chemicals, food additives, pharmaceutical intermediates, daily chemicals and other chemical raw materials.

1. Product description:Calcium carbonate, also known as limestone and stone powder, is a common chemical substance on the earth. It is an inorganic salt mineral. It is alkaline, hardly soluble in water, and easily soluble in acid. It naturally exists in aragonite, calcite, chalk, limestone, and large Chemicalbook.

1.Product DescriptionSodium lignosulfonate is a water-soluble multifunctional polymer electrolyte. It is a lignosulfonate. It has the ability to disperse biological slime, iron oxide scale, and calcium phosphate scale. It can also form a stable complex with zinc and calcium ions. Compound. Sodium lignosulfonate and calcium lignosulfonate are commonly used as water-reducing agents in multifunctional concrete waterproofing agents.

1. Product description:Product namePotassium pyrophosphateCAS7320-34-5MFK4O7P2MW330.33EINECS230-785-7Melting point1090℃PH(40g/l, 25℃) : 10.0~11.0Density2.33StorageStore at room temperature.FormPowderColorWhitePackage25kg/bag2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is a new enterprise integrating production, sales and service.Our products mainly include organic chemicals, inorganic chemicals, food additives, pharmaceutical intermediates, daily chemicals and other chemical raw materials.

1. Product description:Product nameTetrasodium pyrophosphateCAS7722-88-5MFNa4O7P2MW265.90EINECS231-767-1Melting point80 °CBoiling point93.8 °CDensity2.53 g/mL at 25 °C(lit.)StorageStore below +30°C.Formcrystalline powderColorWhitePackage25kg/bag2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is a new enterprise integrating production, sales and service.Our products mainly include organic chemicals, inorganic chemicals, food additives, pharmaceutical intermediates, daily chemica

1. Product description:White crystal powder. Easily soluble in water, the solubility in 100g of water at 20°C is 6.23g, and its aqueous solution is alkaline; insoluble in alcohol.Used as printing and dyeing fine bleaching auxiliary, water softener, etc.Used as a complexing agent for copper in electroplating baths. Used as a rust remover in mechanical processing. Prepare bleaching aid and wool degreasing agent with sodium hydroxide. Auxiliary agent for bleaching, dyeing and fine bleaching of plant fibers. Used as a builder in synthetic detergents.

1. Product description:Dipotassium hydrogen phosphate, also known as dipotassium phosphate, has a chemical formula of K2HPO4·3H2O and a molecular weight of 28.22. The appearance is colorless flakes or needle crystals or white particles. It is deliquescent and easy to dissolve in water (1g is approximately soluble in 3mL of water). The aqueous solution is weakly alkaline. The pH of 1% aqueous solution is about 9, and it is insoluble in ethanol. The density is 2.33g/cm3. After burning, potassium pyrophosphate K4P2O7 is generated.

1. Product description:Product nameCalcium phosphate monobasicCAS10031-30-8MFCaH7O5PMW158.1EINECS600-059-8Melting point100°CBoiling point203°CDensity2.220^1^6Flash point203°CStorageStore at room temperature.FormPowderColorWhitePackage25kg/bag2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is a new enterprise integrating production, sales and service.Our products mainly include organic chemicals, inorganic chemicals, food additives, pharmaceutical intermediates, daily chemicals and other chemi

1. Product description:Product nameCalcium hypophosphiteCAS7789-79-9MFCa(H2PO2)2MW170.05EINECS232-190-8SolubilitySoluble in water. Practically insoluble in alcohol.

1. Product description:Oxalic acid is a strong dicarboxylic acid occurring in many plants and vegetables, usually as its calcium or potassium salts. Oxalic acid is the only possible compound in which two carboxyl groups are joined directly; for this reason oxalic acid is one of the strongest organic acids. Unlike other carboxylic acids (except formic acid), it is readily oxidized; this makes it useful as a reducing agent for photography, bleaching, and ink removal.

1. Product description:Caprylhydroxamic Acid is an ideal organic acid for bacteriostasis. It has efficient and selective chelation ability to divalent iron ions and trivalent iron ions. In the environment with limited iron ions, the growth of Mycobacterium chemicalbook is limited. At the same time, it has the best carbon chain length that can promote the degradation of cell membrane structure.

1. Product description:Product nameIndoleCAS120-72-9MFC8H7NMW117.15EINECS204-420-7Melting point51-54 °C (lit.)Boiling point253-254 °C (lit.)Density1.22Water Solubility2.80 g/L (25 ºC)Flash point>230 °FStorageStore at RT.FormPowderColorWhitePackage25kg/bag2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is a new enterprise integrating production, sales and service.Our products mainly include organic chemicals, inorganic chemicals, food additives, pharmaceutical intermediates, daily chem

SpecificationPruduct nameSilicone oilCAS63148-62-9MFC6H18OSi2MW162.38Melting point−59 °C(lit.)Boiling point101 °C(lit.)EINECS613-156-5Density0.963 g/mL at 25 °CStorage condition2-8°CFormOily LiquidPacking & DeliveryTo better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.Packaging describtion : 1L/bottle ; 25kg/drum ; 200L/drumCompany ProfileShandong Lukong Supply Chain Co.,Ltd. is Located in the beautiful spring city, Ji'nan Shandong, is a new enterpriseintegrating production, sales and service.

1. Product description:Adipic acid, also known as fatty acid, is an important organic binary acid, which can be formed into salt reaction, esterification reaction, amidation reaction and so on, and can be condensed into polymer with two amines or diols. Adipic acid is an important two meta carboxylic acid in industry. It plays an important role in chemical production, organic synthesis industry, medicine, Lubricant manufacturing and so on.

1. Product description:Sodium sulfite is an inorganic compound. It is a white granular powder at room temperature with the odor of sulfur dioxide, stable when dry, and sensitive to moisture. It is soluble in water and glycerin, but insoluble in ethanol. The aqueous solution is alkaline. Its aqueous solution is alkaline to litmus paper and phenolphthalein. It reacts with acid to produce toxic sulfur dioxide gas. The pH of 1Chemicalbook% aqueous solution is 8.3~9.4, with strong reduction sex.

1. Product description:Product name2-Butene-1,4-diolCAS110-64-5MFC4H8O2MW88.11EINECS203-787-0Melting point4-10 °C(lit.)Boiling point235 °C(lit.)Density1.07 g/mL at 25 °C(lit.)Flash point>230 °FStorageStore below +30°C.FormLiquidColorColorlessPackage1L/Bottle 200L/drum or 1000L/drum2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is a new enterprise integrating production, sales and service.Our products mainly include organic chemicals, inorganic chemicals, food additives, pha

1. Product description:Sodium hexametaphosphate is a kind of sodium metaphosphate polymers. It is also known as "polyvinylidene sodium," "sodium multiple metaphosphate", "sodium metaphosphate vitreous body", and "Graham salt". It is a colorless transparent glass-like solid or white powder with greater solubility but low dissolving rate in water. Its aqueous solution exhibits acidic property. Its complex of divalent metal ion is relatively more stable than the complexes of mono-valent metal ion.

1. Product description:Hexafluoroisopropanol (HFIP) is a kind of thick, colorless liquid with pungent smell. It is an ideal solvent for dissolving polyamide and ester, and can be used to analyze nylon. Usually, a small amount of sodium trifluoroacetate can be added to the eluent to reduce the aggregation of the sample. Although HFIP has a certain viscosity, its boiling point is very low. It usually needs to be analyzed at 40 ° C to reduce the back pressure of the chromatographic column.